Here cat6e patch cord refers to copper cable, made from standard jumper cables and connecting hardware, patch cable has two cores to eight cores, ranging from cat6e patch cord copper, connecting hardware into two six or eight modules plugs, or they have one or a plurality of bare thread. Some jumpers have a modular plug at one end and the other end has an eight module slots, or equipped with 100P wiring plugs, MICs, or module slot. Jumpers on the patch panel with the transfer of various links, can be used as patch cables or equipment connections. Jumper two modular RJ45 connectors are used TIA/EIA-568A needle structure, and flexible plug designed to prevent loosening and stuck. The length of the jumper (1) foot (0.305 meters) to 500 feet (15.25 m), the most common is 3 feet, 5 feet, seven feet and 10 feet in length. Modular jumper in the workspace use, cat6e patch cord can also be used as a jumper wire between. In a small office network or home network DIY installation, often referred Dual Internet jumpers. When such standards are not jumpers jumper cabling used, but a special hardware device cable, twisted pair is used when it will directly connect two PC computers, or through two RJ45 ports HUB docking , you need crossover (commonly known as cross-connect cable, jumper). It is a dedicated connection in accordance with the order.