Mounting height 1.rj11 socket when the design when the design requirements specified installation; When the design is not clear, the general should be consistent: socket with safety door
Not less than 0.3M; socket without safety door is not low and 1.8M; proposed purchase socket with safety door as possible, because the small price difference between the two.
2.rj11 socket in the bathroom or other wet locations should be well sealed waterproof, splash outlet. (Note: the socket with safety gates at the base of the general socket
Increasing the plastic bezel (security doors) jack on the front metal reeds basis. Three-hole socket, when the plug is inserted into the ground pile head (slightly longer) first into the hole, outlet
The other side to open agency action within two Confucian, two holes must be plugged into the outlet socket trailer coupling, security door before opening to prevent children accidentally insert metal objects
Lead to accidents. )
3.rj11 socket when installing the panel should be correct and close to the wall. And wiring (phase) should be consistent: single-phase two-hole outlet, facing right hole or holes socket connection
Phase line (FireWire); left hole or holes under the zero line; single-phase three-hole socket, facing right hole socket connection phase line (L, Firewire), left holes zero line (N), the hole ground
(PE).