FTP Cat. 6 Patch panel 24Port Krone IDC

Main Description:
1.2 4 ports patch panel, Cat. 6 FTP type. The structure of each port of this patch Panel is same which makes sure that the performance of each port is Consistent.
2. The outstanding shielding effect: The cable management and grounding Device are combined in this patch panel. All kinds of cables with different Dimensions can be fixed on the patch panel. The shielding foil of the cabels And the grounding device of the patch panel can be connected availably.
3. According to the standard of ISO/IEC 11801: 2002 CLASS E and ANSI/TIA/EIA/568B. 2-1 Cat. 6 standard. T568A and T568B punching sequence are both compatible. Fitting for horizontal distribution in the equipments room and equipments Connecting.
4. Connecting: FCC port for Cat. 6 FTP patch cord and IDC for horizontal Distribution calbes.
5. Compatibility: Compatible for FTP Cat. 6 or Cat. 5eCat. 5 general cable Distribution systems.

Technique Characteristics:
1. Entire high-carbon steel outer frame, with plastic powder cladding.
2. RJ45 jack frame material: PBT, golden plated phosphor bronze pins;
Shielding shell of the RJ45 jack: Brass housing with nickel-plated. IDC clip: Tinned phosphor bronze pins.
3. Fitting for 22AWG/23AWG/24AWG cables, punching duration: 250 times.
FCC ports inserting duration: 750 times.
4. Cabling sequence: T568A & B
5. Punching tools: Standard LSA tool.
6. Testing condition of transmitting capability: 250MHz.